How to Set Cruise Control on Your Nissan Pathfinder

AvatarByDale Richard Cruise/Cruising

How to Set Cruise Control on Your Nissan Pathfinder

Cruise control is a great way to make long road trips more relaxing. It allows you to set a constant speed and then forget about the gas pedal, so you can focus on the scenery or your favorite music. Setting cruise control on your Nissan Pathfinder is easy, and we’ll show you how in this step-by-step guide.

1. Locate the cruise control stalk.

The cruise control stalk is located on the right side of the steering column, just below the turn signal lever. It has a button in the center that you press to turn cruise control on and off, and a rocker switch that you use to increase or decrease your speed.

2. Turn on cruise control.

To turn on cruise control, press the button on the cruise control stalk. The button will light up, and you’ll hear a chime.

3. Set your speed.

Once cruise control is on, use the rocker switch to set your desired speed. The speed will be displayed on the instrument cluster.

4. Maintain your speed.

Once you’ve set your speed, you can let go of the gas pedal and cruise control will take over. The vehicle will maintain your set speed, even if you go up or down a hill.

5. Turn off cruise control.

To turn off cruise control, press the button on the cruise control stalk again. The button will turn off, and you’ll hear a chime.

That’s it! Setting cruise control on your Nissan Pathfinder is easy and can make your long road trips more enjoyable.

How To Set Cruise Control On Nissan Pathfinder?

| Step | Action | Result |
|—|—|—|
| 1. | Press the cruise control button on the steering wheel. | The cruise control light will illuminate. |
| 2. | Set the desired speed using the cruise control buttons. | The speed will be displayed on the instrument cluster. |
| 3. | To resume cruise control after deactivating it, press the cruise control button again. | The vehicle will accelerate to the previously set speed. |

Cruise control is a great way to maintain a steady speed on long road trips. It can also help you save fuel by preventing you from accelerating and decelerating too much. This guide will show you how to set the cruise control on your 2013 or newer Nissan Pathfinder.

Prerequisites

Before you can set the cruise control, you need to make sure that your Pathfinder is equipped with it. To do this, look for the cruise control switch on the steering wheel. It should be a small button with a picture of a car and a speedometer. If you don’t see this switch, your Pathfinder does not have cruise control.

You also need to make sure that the cruise control is engaged. To do this, press the cruise control switch. The light on the switch should come on, and you should feel a slight vibration in the brake pedal.

Step-by-step instructions

1. Press the cruise control switch to engage it.
2. Accelerate to the desired speed.
3. Press the set button on the steering wheel.
4. The cruise control will maintain the set speed.

To adjust the speed, press the plus or minus button on the steering wheel. To turn off the cruise control, press the cancel button.

Cruise control can be a great way to make your long road trips more enjoyable. By following these steps, you can easily set and use the cruise control on your 2013 or newer Nissan Pathfinder.

Here are some additional tips for using cruise control:

  • Use cruise control on long, straight roads. It is not recommended for use in city traffic or on winding roads.
  • Be aware of your surroundings and be prepared to take over if necessary.
  • Use cruise control at a speed that is comfortable for you.
  • Avoid sudden acceleration or deceleration while using cruise control.

By following these tips, you can safely and enjoyably use cruise control on your Nissan Pathfinder.

How To Set Cruise Control On Nissan Pathfinder?

Cruise control is a great way to maintain a steady speed on long road trips. It can also help you save gas by keeping your foot off the gas pedal. To set the cruise control on your Nissan Pathfinder, follow these steps:

1. Make sure your vehicle is in drive.
2. Press the cruise control button on the steering wheel.
3. Press the set button on the steering wheel to set the desired speed.

The cruise control will maintain the set speed until you press the cancel button on the steering wheel. You can also resume the cruise control by pressing the resume button.

Here are some additional tips for using cruise control:

  • Use cruise control on long, straight roads. It is not recommended for use in city traffic or on winding roads.
  • Be aware of your surroundings and adjust your speed accordingly.
  • Use cruise control to help you maintain a safe following distance.
  • Do not use cruise control if you are driving in bad weather conditions.

Cruise control can be a helpful tool, but it is important to use it safely. By following these tips, you can enjoy the benefits of cruise control without putting yourself or others at risk.

How To Turn Off Cruise Control On Nissan Pathfinder

To turn off cruise control on your Nissan Pathfinder, follow these steps:

1. Press the cancel button on the steering wheel.
2. The cruise control indicator light on the dashboard will turn off.

You can also turn off cruise control by pressing the brake pedal.

Troubleshooting Cruise Control Problems On Nissan Pathfinder

If your cruise control is not working properly, there are a few things you can check:

  • Make sure the cruise control is turned on.
  • Check the fuse for the cruise control.
  • Check the wiring for the cruise control.
  • Take your vehicle to a Nissan dealer for service.

Here are some common cruise control problems and their solutions:

  • The cruise control will not engage.

This could be caused by a problem with the cruise control switch, the cruise control computer, or the wiring.

  • The cruise control speed is not consistent.

This could be caused by a problem with the cruise control computer or the throttle position sensor.

  • The cruise control disengages when you brake.

This could be caused by a problem with the brake switch or the cruise control computer.

If you are experiencing any problems with your cruise control, it is best to take your vehicle to a Nissan dealer for service.

Cruise control can be a great way to make long road trips more enjoyable. By following these tips, you can safely and effectively use cruise control on your Nissan Pathfinder.

How do I set the cruise control on my Nissan Pathfinder?

1. Press the cruise control button on the steering wheel.
2. Press the accelerator pedal until you reach the desired speed.
3. Press the set button on the steering wheel.
4. The cruise control will be engaged and the vehicle will maintain the set speed.

How do I turn off the cruise control on my Nissan Pathfinder?

1. Press the cancel button on the steering wheel.
2. The cruise control will be disengaged and the vehicle will return to its normal speed.

What are the different settings on the cruise control on my Nissan Pathfinder?

The cruise control on the Nissan Pathfinder has three different settings:

  • On: The cruise control is engaged and the vehicle will maintain the set speed.
  • Off: The cruise control is disengaged and the vehicle will return to its normal speed.
  • Set: The cruise control is set to a specific speed.

Can I use the cruise control on my Nissan Pathfinder in stop-and-go traffic?

No, you should not use the cruise control in stop-and-go traffic. The cruise control is designed for use on highways and other roads where traffic is flowing smoothly. Using the cruise control in stop-and-go traffic can be dangerous because it can cause the vehicle to accelerate unexpectedly when traffic starts moving again.

What should I do if my cruise control stops working?

If your cruise control stops working, you should pull over to the side of the road and turn off the cruise control. You should then have the cruise control system inspected by a qualified Nissan dealer or technician.

Can I use the cruise control on my Nissan Pathfinder with the transmission in neutral?

No, you should not use the cruise control with the transmission in neutral. The cruise control is designed to be used with the transmission in drive. Using the cruise control with the transmission in neutral can damage the cruise control system.

In this blog post, we have discussed how to set cruise control on a Nissan Pathfinder. We have covered the steps involved in setting cruise control, as well as some of the things to keep in mind when using this feature. We hope that this information has been helpful, and that you are now able to use cruise control safely and effectively on your Nissan Pathfinder.

Here are some key takeaways from this blog post:

  • Cruise control can be a helpful feature to use on long road trips, as it can help you maintain a consistent speed and reduce your fatigue.
  • To set cruise control, press the cruise control button on the steering wheel. Then, press the accelerator pedal until you reach the desired speed. The cruise control will be engaged when you release the accelerator pedal.
  • To cancel cruise control, press the brake pedal or the cruise control button on the steering wheel.
  • You should only use cruise control on well-maintained roads with clear visibility. Be aware of your surroundings and be prepared to take over control of the vehicle at any time.

We hope that you found this blog post helpful. If you have any questions about cruise control, please contact your local Nissan dealer.

Author Profile

Dale Richard
Dale Richard
Dale, in his mid-thirties, embodies the spirit of adventure and the love for the great outdoors. With a background in environmental science and a heart that beats for exploring the unexplored, Dale has hiked through the lush trails of the Appalachian Mountains, camped under the starlit skies of the Mojave Desert, and kayaked through the serene waters of the Great Lakes.

His adventures are not just about conquering new terrains but also about embracing the ethos of sustainable and responsible travel. Dale’s experiences, from navigating through dense forests to scaling remote peaks, bring a rich tapestry of stories, insights, and practical tips to our blog.