How to Measure Your Travel Trailer for a Cover

AvatarByDale Richard Traveling Information

How To Measure A Travel Trailer For A Cover

Camping is a great way to get away from it all, but it’s important to be prepared. One of the most important things to do before you hit the road is to make sure your travel trailer has a cover. A cover will protect your trailer from the elements, keep it clean, and extend its lifespan.

But how do you know what size cover you need? Measuring your travel trailer for a cover isn’t difficult, but it does require a little bit of know-how. In this article, we’ll walk you through the process of measuring your travel trailer so you can get the perfect cover for your next camping trip.

We’ll cover everything you need to know, from finding the right measurement tools to taking accurate measurements. By the end of this article, you’ll be able to measure your travel trailer like a pro!

Step Measurement Instructions
1 Overall length Measure from the front of the trailer to the back of the trailer, including the hitch.
2 Overall width Measure from the left side of the trailer to the right side of the trailer, including the fenders.
3 Overall height Measure from the ground to the top of the trailer, including the A-frame.

How to Measure a Travel Trailer for a Cover?

Tools and Materials Needed

To measure your travel trailer for a cover, you will need the following tools and materials:

  • Tape measure
  • Pencil
  • Paper
  • Sharpie
  • Level
  • Ladder

Measuring the Trailer

1. Start by measuring the length of the trailer. To do this, measure from the front of the trailer to the back of the trailer, including the hitch.
2. Next, measure the width of the trailer. To do this, measure from the side of the trailer to the other side of the trailer, including the fenders.
3. Finally, measure the height of the trailer. To do this, measure from the ground to the top of the trailer, including the A-frame.

Note: If your trailer has any special features, such as a slide-out or a roof vent, you will need to measure those as well.

Once you have measured all of the dimensions of your trailer, you can use the following formula to calculate the size of cover you need:

Length + Width + Height + 12 inches

For example, if your trailer is 20 feet long, 8 feet wide, and 10 feet high, you will need a cover that is at least 20 feet + 8 feet + 10 feet + 12 inches = 48 inches long and 48 inches wide.

Tip: When choosing a cover for your travel trailer, it is important to make sure that the cover is long enough to cover the entire trailer, including the hitch and the fenders. The cover should also be wide enough to cover the entire width of the trailer, plus at least 12 inches on each side.

Measuring the Roof Vent

If your trailer has a roof vent, you will need to measure the vent and add that measurement to the overall height of the trailer. To measure the vent, you will need to:

1. Locate the roof vent. The roof vent is typically located at the front of the trailer, near the peak of the roof.
2. Measure the width of the vent. To do this, measure from one side of the vent to the other side of the vent.
3. Measure the height of the vent. To do this, measure from the bottom of the vent to the top of the vent.

Once you have measured the width and height of the vent, add those measurements to the overall height of the trailer to determine the total height of the cover.

Measuring the Slide-Out

If your trailer has a slide-out, you will need to measure the slide-out and add that measurement to the overall length of the trailer. To measure the slide-out, you will need to:

1. Locate the slide-out. The slide-out is typically located on the side of the trailer, near the back of the trailer.
2. Measure the length of the slide-out. To do this, measure from the front of the slide-out to the back of the slide-out.

Once you have measured the length of the slide-out, add that measurement to the overall length of the trailer to determine the total length of the cover.

Measuring the Steps

If your trailer has steps, you will need to measure the steps and add that measurement to the overall height of the trailer. To measure the steps, you will need to:

1. Locate the steps. The steps are typically located at the back of the trailer, near the door.
2. Measure the height of the steps. To do this, measure from the ground to the top of the steps.

Once you have measured the height of the steps, add that measurement to the overall height of the trailer to determine the total height of the cover.

Installing the Cover

Once you have purchased a cover that is the correct size for your trailer, you can install it by following these steps:

1. Unfold the cover and lay it out flat on the ground.
2. Place the cover over the trailer, making sure that it is centered.
3. Secure the cover to the trailer using the straps or clips that came with the cover.
4. Tighten the straps or clips until the cover is snug against the trailer.

Tips for Storing the Cover

When you are not using the cover, it is important to store it properly to prevent it from getting damaged. Here are a few tips for storing your cover:

How To Measure A Travel Trailer For A Cover?

Measuring your travel trailer for a cover can be a daunting task, but it’s important to get it right so that your cover fits properly and protects your trailer from the elements.

To measure your travel trailer, you will need a tape measure, a ladder, and a friend to help you.

1. Start by measuring the length of your trailer. To do this, measure from the front of the trailer to the back of the trailer at the widest point.
2. Next, measure the width of your trailer. To do this, measure from the left side of the trailer to the right side of the trailer at the widest point.
3. Finally, measure the height of your trailer. To do this, measure from the ground to the top of the trailer at the highest point.

Once you have measured your trailer, you can use these measurements to choose the right size cover. Most covers are available in a variety of sizes, so you should be able to find one that fits your trailer perfectly.

Tips for Measuring Your Travel Trailer:

  • Make sure to measure your trailer when it is fully loaded. This will ensure that you have enough coverage for all of your gear.
  • If you have any add-ons on your trailer, such as a ladder or a bike rack, be sure to measure those as well.
  • It is always a good idea to have a friend help you measure your trailer. This will make the process easier and more accurate.

Choosing the Right Cover Size

When choosing a cover for your travel trailer, it is important to choose the right size. A cover that is too small will not provide adequate protection, and a cover that is too large will be difficult to install and remove.

To choose the right size cover, you will need to know the length, width, and height of your trailer. You can find these measurements in your trailer’s owner’s manual.

Once you know the dimensions of your trailer, you can use a cover size chart to find the right size cover. Most cover manufacturers have size charts available on their websites.

Installing the Cover

Installing a cover on your travel trailer is a relatively simple process, but there are a few things you need to keep in mind.

  • First, make sure that the cover is the right size for your trailer. A cover that is too small or too large will be difficult to install and remove.
  • Second, make sure that the cover is installed correctly. If the cover is not installed correctly, it will not provide adequate protection for your trailer.
  • Third, be careful not to damage the cover when you are installing it. A damaged cover will not provide adequate protection for your trailer.

To install a cover on your travel trailer, follow these steps:

1. Lay the cover out on the ground. Make sure that the cover is the right size for your trailer.
2. Place the cover over your trailer. Make sure that the cover is centered on the trailer and that it is properly aligned.
3. Secure the cover in place. You can use bungee cords, straps, or clips to secure the cover in place.

Once you have installed the cover, you should check to make sure that it is properly secured. The cover should not move when you shake the trailer.

Measuring, choosing, and installing a cover for your travel trailer is a relatively simple process. By following these tips, you can ensure that your trailer is properly protected from the elements.

Additional Resources:

  • [How to Choose a Travel Trailer Cover](https://www.rvshare.com/blog/how-to-choose-a-travel-trailer-cover/)
  • [How to Install a Travel Trailer Cover](https://www.campingworld.com/blog/how-to-install-a-travel-trailer-cover/)
  • [Travel Trailer Covers: A Buyer’s Guide](https://www.thebalance.com/travel-trailer-covers-a-buyers-guide-4177700)

    How do I measure a travel trailer for a cover?

To measure your travel trailer for a cover, you will need:

  • A tape measure
  • A pencil
  • A piece of paper

1. Park your trailer on a level surface.
2. Open all of the doors and compartments on your trailer.
3. Measure the length of your trailer from the front bumper to the back bumper.
4. Measure the width of your trailer at its widest point.
5. Measure the height of your trailer from the ground to the top of the roof.
6. Record your measurements on a piece of paper.

Once you have your measurements, you can use them to order a travel trailer cover that will fit your vehicle perfectly.

What size cover do I need for my travel trailer?

The size of cover you need for your travel trailer will depend on the length, width, and height of your trailer. To find the right size cover, measure your trailer according to the instructions above and then compare your measurements to the size chart of the cover you are considering.

How do I install a travel trailer cover?

To install a travel trailer cover, you will need:

  • A travel trailer cover
  • A ladder
  • A helper

1. Park your trailer on a level surface.
2. Open all of the doors and compartments on your trailer.
3. Unfold the cover and lay it out on the ground next to your trailer.
4. Align the cover with the front of your trailer.
5. Have your helper hold the cover in place while you climb up the ladder and secure the cover to the roof of your trailer.
6. Secure the cover to the sides of your trailer using the provided straps.
7. Close all of the doors and compartments on your trailer.

Your travel trailer cover is now installed!

How do I care for a travel trailer cover?

To care for your travel trailer cover, you will need to:

  • Store your cover in a dry place when it is not in use.
  • Clean your cover with a mild detergent and water.
  • Do not use harsh chemicals or abrasive cleaners on your cover.
  • Do not dry your cover in direct sunlight.
  • Inspect your cover regularly for tears or damage.

By following these tips, you can help to extend the life of your travel trailer cover.

In this blog post, we have discussed how to measure a travel trailer for a cover. We have covered the different types of covers available, as well as the steps involved in measuring your trailer. We hope that this information has been helpful, and that you are now able to choose and purchase the perfect cover for your travel trailer.

Here are a few key takeaways:

  • When choosing a cover, it is important to consider the size, shape, and features of your trailer.
  • You will need to measure the length, width, and height of your trailer, as well as the height of the A-frame.
  • It is also important to consider the type of material you want your cover to be made from.
  • Once you have chosen a cover, you can follow the steps in this blog post to measure your trailer and order the correct size.

We hope that you enjoy your new travel trailer cover!

Author Profile

Dale Richard
Dale Richard
Dale, in his mid-thirties, embodies the spirit of adventure and the love for the great outdoors. With a background in environmental science and a heart that beats for exploring the unexplored, Dale has hiked through the lush trails of the Appalachian Mountains, camped under the starlit skies of the Mojave Desert, and kayaked through the serene waters of the Great Lakes.

His adventures are not just about conquering new terrains but also about embracing the ethos of sustainable and responsible travel. Dale’s experiences, from navigating through dense forests to scaling remote peaks, bring a rich tapestry of stories, insights, and practical tips to our blog.