How to Adjust Your Camper Slide Out (Up and Down)

AvatarByDale Richard Camping

How to Adjust Camper Slide Out Up and Down

Camper slide outs are a great way to add extra space to your RV, but they can also be a pain to adjust if they’re not working properly. If your slide out is sticking, won’t go all the way out, or is coming out crooked, there are a few things you can check to try to fix the problem.

In this article, we’ll walk you through the steps on how to adjust your camper slide out up and down. We’ll also provide some tips on how to prevent future problems. So whether you’re a new camper owner or you’ve been RVing for years, read on for all the information you need to know about adjusting your slide out.

How To Adjust Camper Slide Out Up And Down?

| Step | Action | Explanation |
|—|—|—|
| 1 | Locate the slide out control. This is usually a small lever or knob located near the bottom of the slide out. |
| 2 | Turn the control clockwise to raise the slide out. Turn the control counterclockwise to lower the slide out. |
| 3 | Adjust the slide out until it is level. You can do this by using a level or by eye. |
| 4 | Lock the slide out in place. Once the slide out is level, you can lock it in place by turning the control clockwise until it is tight. |

A camper slide out is a great way to increase the living space in your camper. However, if the slide out is not properly adjusted, it can be a major pain. In this article, we will show you how to adjust a camper slide out up and down. We will also provide tips on how to prevent future problems.

Tools and Materials Needed

  • Tape measure
  • Level
  • Wrench
  • Penetrating oil
  • Pliers
  • Safety glasses

Steps to Adjust the Slide Out

1. Identify the Problem

The first step is to identify the problem with the slide out. Is it not going all the way out? Is it coming out crooked? Is it sticking? Once you have identified the problem, you can begin to troubleshoot the issue.

2. Check the Slide Out Tracks

The most common cause of a camper slide out not working properly is a problem with the tracks. The tracks are the metal guides that the slide out rides on. If the tracks are dirty or damaged, they can cause the slide out to bind or not go all the way out.

To check the tracks, you will need to remove the slide out. Once the slide out is removed, you can inspect the tracks for any damage. If the tracks are dirty, you can clean them with a degreaser and a brush. If the tracks are damaged, you will need to replace them.

3. Check the Slide Out Rollers

The rollers are the small wheels that the slide out rides on. If the rollers are worn out or damaged, they can cause the slide out to bind or not go all the way out.

To check the rollers, you will need to remove the slide out. Once the slide out is removed, you can inspect the rollers for any damage. If the rollers are worn out or damaged, you will need to replace them.

4. Lubricate the Slide Out

If the slide out is sticking, it may need to be lubricated. You can use a penetrating oil or a silicone lubricant to lubricate the slide out.

To lubricate the slide out, you will need to remove the slide out. Once the slide out is removed, you can apply the lubricant to the tracks and rollers.

5. Adjust the Slide Out

If the slide out is not going all the way out, you may need to adjust it. The slide out is typically adjusted by loosening the bolts that hold it in place and then sliding it into the desired position. Once the slide out is in the desired position, you can tighten the bolts.

6. Prevent Future Problems

To prevent future problems with your camper slide out, you can take a few steps to keep it in good condition.

  • Keep the slide out clean. Dirt and debris can build up on the tracks and rollers and cause the slide out to bind.
  • Lubricate the slide out regularly. This will help to keep the slide out moving smoothly.
  • Inspect the slide out regularly. Check for any damage to the tracks, rollers, or seals.
  • Replace worn out or damaged parts immediately. This will help to prevent further damage to the slide out.

By following these tips, you can keep your camper slide out in good condition and avoid future problems.

Adjusting a camper slide out up and down is a relatively simple task that can be completed by most DIYers. By following the steps in this article, you can have your slide out adjusted in no time.

Here are some additional tips for adjusting a camper slide out:

  • If you are having trouble adjusting the slide out, you can always take it to a qualified RV technician.
  • Make sure to use the correct tools for the job.
  • Be careful not to damage the slide out or the surrounding area.
  • Take your time and work safely.

How To Adjust Camper Slide Out Up And Down?

Adjusting a camper slide out up and down is a relatively simple task that can be completed by most DIYers. However, it is important to follow the steps carefully to avoid damaging the slide out or your camper.

Tools and Materials

To adjust a camper slide out, you will need the following tools and materials:

  • A socket wrench
  • A screwdriver
  • Penetrating oil
  • A rag
  • A level

Steps

1. Park your camper on a level surface. This will ensure that the slide out is properly aligned when you are finished adjusting it.
2. Disconnect the slide out from the electrical system. This will prevent you from accidentally getting shocked while you are working on the slide out.
3. Remove the access panel to the slide out. The access panel is typically located on the inside of the camper, near the slide out. Once you have found the access panel, remove the screws that hold it in place and carefully remove the panel.
4. Locate the adjustment bolts. The adjustment bolts are typically located on the bottom of the slide out. There will be two bolts, one on each side of the slide out.
5. Turn the adjustment bolts to adjust the slide out. To raise the slide out, turn the bolts clockwise. To lower the slide out, turn the bolts counterclockwise.
6. Reattach the access panel. Once you have finished adjusting the slide out, reattach the access panel and tighten the screws.
7. Reconnect the slide out to the electrical system.
8. Test the slide out to make sure it is working properly. Open and close the slide out several times to make sure that it is moving smoothly and that it is properly aligned.

Adjusting a camper slide out up and down is a relatively simple task that can be completed by most DIYers. However, it is important to follow the steps carefully to avoid damaging the slide out or your camper. If you are not comfortable performing this task, you should have a qualified professional do it for you.

How do I adjust my camper slide out up and down?

There are a few different ways to adjust your camper slide out up and down. The most common way is to use the slide out crank. This is a lever located on the outside of the camper, near the slide out. To adjust the slide out, turn the crank clockwise to raise it and counterclockwise to lower it.

Another way to adjust your camper slide out is to use the slide out control panel. This panel is located inside the camper, near the door to the slide out. To adjust the slide out, use the buttons on the panel to raise or lower it.

Finally, you can also adjust your camper slide out by using the slide out leveling jacks. These jacks are located under the camper, near the slide out. To adjust the slide out, raise or lower the jacks until the slide out is level.

What are the common problems with camper slide outs?

There are a few common problems that can occur with camper slide outs. These include:

  • Binding: This occurs when the slide out becomes stuck and cannot be moved. This can be caused by a number of factors, such as dirt or debris getting caught in the tracks, or the slide out being overloaded.
  • Sagging: This occurs when the slide out is not properly supported and sags down. This can be caused by a number of factors, such as the slide out being overloaded, or the slide out being installed incorrectly.
  • Wobble: This occurs when the slide out wobbles back and forth when it is extended. This can be caused by a number of factors, such as the slide out being unbalanced, or the slide out being installed incorrectly.

How can I prevent problems with my camper slide outs?

There are a few things you can do to prevent problems with your camper slide outs. These include:

  • Keep the tracks clean: Dirt and debris can build up in the tracks of your camper slide out and cause it to bind. To prevent this, make sure to clean the tracks regularly.
  • Don’t overload the slide out: Overloading the slide out can cause it to sag or wobble. To prevent this, only load the slide out with the amount of weight it is designed to support.
  • Install the slide out correctly: If you are installing a new slide out, be sure to follow the manufacturer’s instructions carefully. Improper installation can lead to a number of problems, such as binding, sagging, and wobble.

What should I do if my camper slide out is not working properly?

If your camper slide out is not working properly, there are a few things you can do. First, try to identify the problem. Is the slide out binding, sagging, or wobbling? Once you have identified the problem, you can take steps to fix it.

If you are unable to fix the problem yourself, you can take your camper to a qualified RV repair shop. They will be able to diagnose the problem and repair it properly.

How much does it cost to adjust a camper slide out?

The cost of adjusting a camper slide out will vary depending on the type of camper and the extent of the adjustment that needs to be made. In general, you can expect to pay between $100 and $200 for an adjustment.

If you are unable to adjust the slide out yourself, you can take your camper to a qualified RV repair shop. They will be able to adjust the slide out for you for a fee.

In this blog post, we have discussed how to adjust a camper slide out up and down. We have covered the different types of slide outs, the tools you will need, and the steps involved in the adjustment process. We hope that this information has been helpful and that you are now able to adjust your camper slide out with confidence.

Here are a few key takeaways from this blog post:

  • There are two main types of slide outs: electric and manual.
  • To adjust an electric slide out, you will need a screwdriver, a hex key, and a voltmeter.
  • To adjust a manual slide out, you will need a wrench and a screwdriver.
  • The steps involved in adjusting a slide out vary depending on the type of slide out you have.
  • It is important to follow the manufacturer’s instructions when adjusting your slide out.
  • If you are not comfortable adjusting your slide out, you can always take your camper to a qualified dealer.

Author Profile

Dale Richard
Dale Richard
Dale, in his mid-thirties, embodies the spirit of adventure and the love for the great outdoors. With a background in environmental science and a heart that beats for exploring the unexplored, Dale has hiked through the lush trails of the Appalachian Mountains, camped under the starlit skies of the Mojave Desert, and kayaked through the serene waters of the Great Lakes.

His adventures are not just about conquering new terrains but also about embracing the ethos of sustainable and responsible travel. Dale’s experiences, from navigating through dense forests to scaling remote peaks, bring a rich tapestry of stories, insights, and practical tips to our blog.