How to Change a Camper Toilet: A Step-by-Step Guide
How to Change a Camper Toilet
Camper toilets are a necessity for any RVer, but they can also be a source of trouble. If your camper toilet is not working properly, it can be a major inconvenience. Fortunately, changing a camper toilet is a relatively simple task that can be completed in a few hours.
In this article, we will walk you through the process of changing a camper toilet, step-by-step. We will cover everything from removing the old toilet to installing the new one. By the end of this article, you will be able to change your camper toilet like a pro!
So, if your camper toilet is giving you trouble, don’t despair. Just follow these steps, and you’ll be back to enjoying your RV in no time.
Step | Instructions | Image |
---|---|---|
1 | Turn off the water supply to the toilet. | ![]() |
2 | Remove the toilet seat. | ![]() |
3 | Disconnect the water line and the sewer line. | ![]() |
4 | Remove the old toilet. | ![]() |
5 | Install the new toilet. | ![]() |
6 | Reconnect the water line and the sewer line. | ![]() |
7 | Turn on the water supply to the toilet. | ![]() |
8 | Test the toilet to make sure it is working properly. | ![]() |
How to Change a Camper Toilet?
Gather the necessary tools and materials.
Before you can begin the process of changing your camper toilet, you will need to gather the necessary tools and materials. This will include:
- A new toilet
- A toilet flange
- A wax ring
- A screwdriver
- A wrench
- A bucket
- A hose
- A pair of pliers
- A putty knife
- Plumbing tape
Disconnect the water supply and sewer line.
The first step in changing a camper toilet is to disconnect the water supply and sewer line. To do this, you will need to:
1. Turn off the water supply to the camper. This is usually located at the back of the camper, near the water heater.
2. Disconnect the water line from the toilet. The water line is usually a 1/2-inch copper pipe that connects to the bottom of the toilet. To disconnect the water line, you will need to loosen the nut on the end of the pipe with a wrench.
3. Disconnect the sewer line from the toilet. The sewer line is usually a 3/8-inch PVC pipe that connects to the bottom of the toilet. To disconnect the sewer line, you will need to loosen the nut on the end of the pipe with a wrench.
Remove the old toilet.
Once you have disconnected the water supply and sewer line, you can remove the old toilet. To do this, you will need to:
1. Place a bucket under the toilet to catch any water that may spill out.
2. Remove the bolts that hold the toilet to the floor. The bolts are usually located on the back of the toilet, near the bottom. To remove the bolts, you will need to use a screwdriver.
3. Lift up on the toilet and pull it away from the floor.
Install the new toilet.
Once you have removed the old toilet, you can install the new toilet. To do this, you will need to:
1. Apply a bead of plumber’s putty around the bottom of the new toilet.
2. Place the new toilet on the floor and align it with the bolts in the floor.
3. Insert the bolts through the holes in the bottom of the toilet and tighten them with a wrench.
4. Connect the water supply and sewer line to the new toilet.
5. Turn on the water supply to the camper.
6. Flush the toilet to make sure that it is working properly.
Changing a camper toilet is a relatively simple task that can be completed in a few hours. By following these steps, you can easily replace your old toilet with a new one.
Remove the old toilet.
To remove the old toilet, you will need the following tools:
- A screwdriver
- A wrench
- A bucket
- A pair of gloves
- A putty knife
- A utility knife
1. Turn off the water supply to the toilet. This is usually located under the sink or behind the toilet.
2. Flush the toilet to empty the tank.
3. Remove the toilet seat. There will be two bolts on the back of the seat. Use a screwdriver to loosen these bolts and remove the seat.
4. Remove the nuts that hold the toilet to the floor. These nuts are usually located on the back of the toilet. Use a wrench to loosen the nuts and remove them.
5. Place a bucket underneath the toilet to catch any water that may leak out.
6. Use a putty knife to loosen the wax ring around the base of the toilet. The wax ring is a rubber gasket that seals the toilet to the floor.
7. Use a utility knife to cut the wax ring. Be careful not to cut the floor.
8. Lift the toilet up and away from the floor. Be careful not to drop the toilet.
9. Clean the area where the toilet was installed. Remove any residual wax or debris.
Install the new toilet.
To install the new toilet, you will need the following tools:
- A screwdriver
- A wrench
- A bucket
- A pair of gloves
- A putty knife
- A utility knife
- A new toilet
- A new wax ring
1. Place the new toilet in the location where the old toilet was installed. Make sure that the toilet is level.
2. Apply a bead of plumber’s putty around the base of the toilet. This will help to seal the toilet to the floor.
3. Place the new wax ring on the floor. The wax ring should be centered on the drain hole.
4. Lower the toilet onto the wax ring. Be careful not to damage the wax ring.
5. Tighten the nuts that hold the toilet to the floor.
6. Connect the water supply to the toilet.
7. Replace the toilet seat.
8. Flush the toilet to test the installation.
Replacing a camper toilet is a relatively simple task that can be completed in about an hour. By following these steps, you can easily remove the old toilet and install a new one.
How to Change a Camper Toilet?
Q: What tools do I need to change a camper toilet?
A: You will need the following tools:
- A screwdriver
- A wrench
- A putty knife
- A bucket
- A hose
- A new toilet seal
- A new toilet flapper
Q: How do I remove the old toilet?
A: 1. Turn off the water supply to the toilet.
2. Flush the toilet to empty the tank.
3. Remove the bolts that hold the toilet to the floor.
4. Use a putty knife to loosen the old toilet seal.
5. Lift the toilet off the floor and set it aside.
Q: How do I install the new toilet?
A: 1. Apply a new toilet seal to the bottom of the new toilet.
2. Center the new toilet over the drain hole.
3. Insert the bolts through the holes in the toilet and tighten them.
4. Connect the water supply line to the toilet.
5. Flush the toilet to check for leaks.
Q: What if the toilet is leaking?
A: If the toilet is leaking, there are a few possible causes:
- The toilet seal is not properly seated.
- The toilet flapper is not sealing properly.
- The toilet tank is not properly adjusted.
To troubleshoot the leak, you can try the following:
- Check the toilet seal and make sure it is properly seated.
- Replace the toilet flapper.
- Adjust the toilet tank so that the water level is about 1 inch below the top of the overflow tube.
If the leak persists, you may need to call a plumber.
Q: How often should I change my camper toilet?
A: You should change your camper toilet every 1-2 years, or more often if it is showing signs of wear and tear.
Q: What are the benefits of changing my camper toilet?
There are several benefits to changing your camper toilet, including:
- Improved sanitation
- Reduced risk of leaks
- Increased comfort
- Longer lifespan of your toilet
Changing a camper toilet is a relatively simple task, but it is important to do it correctly in order to avoid any leaks or damage. By following the steps in this guide, you can easily and safely change your camper toilet in no time.
Here are the key takeaways from this guide:
- Before you begin, make sure you have all of the necessary tools and materials.
- Turn off the water supply to the toilet and flush it to drain the tank.
- Remove the old toilet by disconnecting the water line and sewer hose, and then unscrewing the bolts that hold it in place.
- Clean the area around the toilet and install the new toilet by reversing the steps for removal.
- Be sure to reconnect the water supply and sewer hose, and then flush the toilet to check for leaks.
By following these steps, you can easily and safely change your camper toilet in no time.
Author Profile

-
Dale, in his mid-thirties, embodies the spirit of adventure and the love for the great outdoors. With a background in environmental science and a heart that beats for exploring the unexplored, Dale has hiked through the lush trails of the Appalachian Mountains, camped under the starlit skies of the Mojave Desert, and kayaked through the serene waters of the Great Lakes.
His adventures are not just about conquering new terrains but also about embracing the ethos of sustainable and responsible travel. Dale’s experiences, from navigating through dense forests to scaling remote peaks, bring a rich tapestry of stories, insights, and practical tips to our blog.
Latest entries
- January 19, 2024HikingHow to Lace Hiking Boots for a Perfect Fit
- January 19, 2024CampingHow to Dispose of Camping Propane Tanks the Right Way
- January 19, 2024Traveling InformationIs Buffalo Still Under Travel Ban? (Updated for 2023)
- January 19, 2024Cruise/CruisingWhich Carnival Cruise Is Best for Families?