How to Create an Angled Plane in SolidWorks (Step-by-Step Guide)

How to Create an Angled Plane in Solidworks

Solidworks is a powerful 3D modeling software that can be used to create a variety of complex objects. One of the basic features of Solidworks is the ability to create angled planes. Angled planes are useful for creating surfaces that are not parallel to the X, Y, or Z axes. In this tutorial, we will show you how to create an angled plane in Solidworks.

We will start by creating a new part file. Then, we will use the Plane tool to create a flat plane. Next, we will use the Move/Rotate/Scale tool to rotate the plane to the desired angle. Finally, we will use the Fillet tool to create a rounded edge on the plane.

By the end of this tutorial, you will be able to create angled planes in Solidworks with ease. So let’s get started!

Step	Instructions	Image
1	Click on the Sketch tab on the top toolbar.
2	Click on the 3 Point Plane tool in the Sketch Entities toolbar.
3	Click on the first point of the angled plane.
4	Click on the second point of the angled plane.
5	Click on the third point of the angled plane.
6	The angled plane will be created.

How to Create an Angled Plane in SolidWorks?

SolidWorks is a powerful CAD software that can be used to create a variety of 3D models. One of the basic features of SolidWorks is the ability to create planes. Planes are flat surfaces that can be used as reference points for creating other features. In this tutorial, we will show you how to create an angled plane in SolidWorks.

Step 1: Create a sketch

The first step is to create a sketch on a face of the existing solid. To do this, click on the “Sketch” tab in the ribbon and select the “New Sketch” command. This will create a new sketch on the active face.

Step 2: Add an angled construction line

The next step is to add an angled construction line to the sketch. To do this, click on the “Line” tool in the toolbar and draw a line from one corner of the sketch to the opposite corner. Make sure that the line is angled at the desired angle.

Step 3: Extrude the construction line

The next step is to extrude the construction line into a plane. To do this, right-click on the construction line and select the “Extrude” command. In the Extrude dialog box, set the “Direction” to “Vector” and enter the desired distance. Click on the “OK” button to extrude the construction line into a plane.

Step 4: Delete the construction line

The final step is to delete the construction line. To do this, right-click on the construction line and select the “Delete” command.

In this tutorial, we showed you how to create an angled plane in SolidWorks. By following these steps, you can create angled planes for a variety of purposes, such as creating 3D models or creating reference points for other features.

Here are some additional tips for creating angled planes in SolidWorks:

• Use the “Construction Plane” tool to create a temporary plane that you can use as a reference for creating the angled plane.
• Use the “Offset” tool to create a copy of the existing plane and then rotate it to the desired angle.
• Use the “Mirror” tool to create a mirrored copy of the existing plane and then rotate it to the desired angle.

By using these tips, you can create angled planes quickly and easily in SolidWorks.

Step 3: Extrude the angled plane

Once you have created the angled plane, you need to extrude it to create a solid object. To do this, follow these steps:

1. Select the angled plane.
2. Click the Extrude button on the Features** toolbar.
3. In the Extrude** dialog box, specify the following settings:

• Distance: The distance that you want to extrude the angled plane.
• Taper: The taper angle of the extruded object.
• Other options: You can also specify other options, such as the draft angle and the surface finish.

4. Click OK**.

The angled plane will be extruded to create a solid object.

Step 4: (Optional) Fillet the edges of the angled plane

You can optionally fillet the edges of the angled plane to create a more rounded appearance. To do this, follow these steps:

1. Select the angled plane.
2. Click the Fillet button on the Features** toolbar.
3. In the Fillet** dialog box, specify the following settings:

• Radius: The radius of the fillet.
• Other options: You can also specify other options, such as the type of fillet and the miter limit.

4. Click OK**.

The edges of the angled plane will be filleted.

In this tutorial, you learned how to create an angled plane in Solidworks. You also learned how to extrude the angled plane and how to fillet the edges of the angled plane.

I hope this tutorial was helpful. If you have any questions, please feel free to leave a comment below.

How do I create an angled plane in SolidWorks?

To create an angled plane in SolidWorks, follow these steps:

1. Select the Plane tool from the Sketch** toolbar.
2. In the Plane dialog box, select the Angled** option.
3. Enter the desired angle for the plane in the Angle** field.
4. **Select the face or edge of the existing model that you want to use as the reference for the new plane.
5. Click OK**.

The new plane will be created at the specified angle relative to the selected face or edge.

Can I create an angled plane from a sketch?

Yes, you can create an angled plane from a sketch by following these steps:

1. **Create a sketch on the face or edge of the existing model that you want to use as the reference for the new plane.
2. **Draw a line or arc at the desired angle.
3. Right-click on the line or arc and select Convert to Plane**.
4. In the Convert to Plane dialog box, select the Angled** option.
5. Enter the desired angle for the plane in the Angle** field.
6. Click OK**.

The new plane will be created at the specified angle relative to the selected face or edge.

How do I rotate an existing plane?

To rotate an existing plane, follow these steps:

1. **Select the plane that you want to rotate.
2. Right-click on the plane and select Rotate**.
3. In the Rotate dialog box, enter the desired angle of rotation in the Angle** field.
4. Select the axis of rotation from the Axis** drop-down list.
5. Click OK**.

The plane will be rotated by the specified angle around the selected axis.

How do I delete an angled plane?

To delete an angled plane, follow these steps:

1. **Select the plane that you want to delete.
2. Press the Delete** key on your keyboard.

The plane will be deleted from the model.

In this tutorial, we have learned how to create an angled plane in Solidworks. We first created a sketch on the top face of the base feature, then used the Plane tool to create an angled plane from the sketch. We also learned how to change the angle of the plane and how to position it in the model. Finally, we exported the angled plane to a STEP file.

Creating angled planes is a common task in Solidworks, and it is important to know how to do it correctly. By following the steps in this tutorial, you will be able to create angled planes in Solidworks with ease.