How to Measure Your Camper for a Cover (The Ultimate Guide)

AvatarByDale Richard Camping

How to Measure a Camper for a Cover

Camping is a great way to get away from it all and enjoy the great outdoors. But if you don’t have a camper cover, you could be in for a rude awakening when you wake up to find your camper soaked through with rainwater.

A camper cover is an essential piece of equipment for any camper owner. It can protect your camper from the elements, keeping it dry and safe from damage. But before you can buy a camper cover, you need to know how to measure your camper.

In this article, we’ll show you how to measure your camper for a cover. We’ll also provide some tips on choosing the right cover for your needs.

So if you’re ready to learn how to measure your camper for a cover, keep reading!

Step Instructions Image
1 Measure the length of your camper from the front to the back.
2 Measure the width of your camper from side to side.
3 Measure the height of your camper from the ground to the top of the roof.

A camper cover is a great way to protect your camper from the elements, but it’s important to make sure you get the right size cover. If the cover is too small, it won’t fit properly and could damage your camper. If the cover is too big, it will be flapping in the wind and could be a safety hazard.

This guide will show you how to measure your camper so you can get the perfect-fitting cover.

Tools and Materials

You will need the following tools and materials to measure your camper:

  • Tape measure
  • Pencil
  • Paper
  • Scissors
  • Tent stakes
  • Level
  • Ladder

Measuring the Camper

To measure your camper, you will need to measure the length, width, and height.

1. Measure the length of the camper from front to back. Start at the front of the camper and measure to the back. Make sure to measure at the widest point of the camper.
2. Measure the width of the camper from side to side. Start at one side of the camper and measure to the other side. Make sure to measure at the widest point of the camper.
3. Measure the height of the camper from the ground to the top of the roof. Start at the ground and measure up to the top of the roof. Make sure to measure at the highest point of the camper.

Once you have measured your camper, you can mark the measurements on a piece of paper. This will help you when you are shopping for a camper cover.

Tips for Measuring Your Camper

Here are a few tips for measuring your camper:

  • Make sure to measure in inches.
  • Measure in the same units that the camper cover is sold in.
  • Be accurate with your measurements.
  • If you are unsure about how to measure your camper, ask a friend or family member for help.

Measuring your camper for a cover is easy if you follow these steps. By taking the time to measure your camper, you can be sure that you get the right-sized cover to protect your investment.

Here are some additional tips for choosing a camper cover:

  • Choose a cover that is made from a durable material.
  • Choose a cover that is water-resistant or waterproof.
  • Choose a cover that has a built-in UV protection.
  • Choose a cover that is easy to install and remove.

By following these tips, you can find the perfect camper cover to protect your camper from the elements.

How To Measure A Camper For A Cover?

Measuring your camper for a cover is an important step in ensuring that you get the right size cover for your needs. Here are the steps on how to measure a camper for a cover:

1. Measure the length of your camper. Start by measuring the length of your camper from the front of the hitch to the back of the camper. Make sure to measure at the widest point of the camper, including any overhangs.
2. Measure the width of your camper. Measure the width of your camper from the left side to the right side. Make sure to measure at the widest point of the camper, including any overhangs.
3. Measure the height of your camper. Measure the height of your camper from the ground to the top of the camper. Make sure to measure at the highest point of the camper, including any rooftop accessories.
4. Measure the distance from the ground to the bottom of your camper. This measurement will be used to determine how much clearance you need for the cover to sit on top of your camper.

Once you have taken all of these measurements, you can use them to order a camper cover that is the right size for your camper. Be sure to add a few inches to each measurement to allow for some extra room.

Tips for Measuring Your Camper for a Cover

  • When measuring your camper, make sure to use a long, straight edge. This will help you to get accurate measurements.
  • Be sure to measure at the widest and highest points of your camper. This will ensure that the cover fits properly.
  • If you have any rooftop accessories, such as a ladder or solar panel, be sure to measure them and add them to your measurements.
  • When ordering a camper cover, be sure to give the manufacturer all of your measurements. This will help them to make sure that you get the right size cover.

Cutting the Cover

Once you have ordered your camper cover, you will need to cut it to size. Here are the steps on how to cut a camper cover:

1. Lay the cover out flat on a large surface. This could be a tarp, the ground, or a large table.
2. Use a tape measure to mark the measurements of your camper. Make sure to add a few inches to each measurement to allow for some extra room.
3. Use a sharp knife or scissors to cut the cover along the marked lines. Be careful not to cut yourself.
4. Sew the cover together using a strong thread. Make sure to sew the seams in a way that will prevent them from coming undone.

Tips for Cutting a Camper Cover

  • When cutting the cover, make sure to use a sharp knife or scissors. This will help you to get a clean cut.
  • Be careful not to cut yourself. If you are not comfortable using a sharp knife or scissors, you can have someone else help you cut the cover.
  • Sew the cover together using a strong thread. This will help to prevent the seams from coming undone.

Installing the Cover

Once you have cut the cover to size, you will need to install it on your camper. Here are the steps on how to install a camper cover:

1. Place the cover over the camper. Make sure that the cover is centered on the camper and that it is not twisted.
2. Secure the cover in place with tent stakes. Place the tent stakes around the perimeter of the cover, making sure that they are secure.
3. Use a level to make sure that the cover is installed evenly. The cover should be level from front to back and side to side.
4. Enjoy your new camper cover! Your camper cover will protect your camper from the elements and keep it looking new for years to come.

Tips for Installing a Camper Cover

  • When installing the cover, make sure that it is centered on the camper and that it is not twisted.
  • Secure the cover in place with tent stakes. The tent stakes should be placed around the perimeter of the cover, making sure that they are secure.
  • Use a level to make sure that the cover is installed evenly. The cover should be level from front to back and side to side.
  • Enjoy your new camper cover! Your camper cover will protect your camper from the elements and keep it looking new for years to come.

Measuring, cutting, and installing a camper cover is a relatively simple process. By following these steps, you can be sure that you get the right size cover for your camper and that it is installed correctly. With a

How do I measure a camper for a cover?

To measure a camper for a cover, you will need to know the following measurements:

  • Length: The length of the camper from the front to the back.
  • Width: The width of the camper from side to side.
  • Height: The height of the camper from the ground to the top of the roof.
  • Door height: The height of the door on the camper.
  • Door width: The width of the door on the camper.

Once you have these measurements, you can use them to order a camper cover that will fit your vehicle.

What if my camper has an awning?

If your camper has an awning, you will need to measure the awning separately from the camper. The awning should be measured from the front of the awning to the back of the awning, and from the ground to the top of the awning.

What if my camper has a slide-out?

If your camper has a slide-out, you will need to measure the slide-out separately from the camper. The slide-out should be measured from the front of the slide-out to the back of the slide-out, and from the ground to the top of the slide-out.

What if my camper has a different shape?

If your camper has a different shape, you may need to order a custom camper cover. A custom camper cover will be made to fit your specific camper, and will ensure that it is properly protected.

Where can I buy a camper cover?

You can buy a camper cover from a variety of retailers, including online retailers, camping stores, and RV dealerships. When choosing a camper cover, be sure to read the reviews to make sure that it is a quality product.

How much does a camper cover cost?

The cost of a camper cover will vary depending on the size, material, and brand of the cover. Camper covers can range in price from a few hundred dollars to a few thousand dollars.

How do I install a camper cover?

To install a camper cover, you will need to follow the instructions that come with the cover. Generally, you will need to attach the cover to the camper using straps or clips.

How do I care for a camper cover?

To care for a camper cover, you will need to:

  • Store the cover in a dry place when not in use.
  • Clean the cover with a mild detergent and water.
  • Do not use bleach or harsh chemicals on the cover.
  • Do not iron the cover.
  • Do not dry clean the cover.

By following these tips, you can help to extend the life of your camper cover.

measuring your camper for a cover is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can ensure that you get a cover that fits your camper perfectly and protects it from the elements.

Here are a few key takeaways to remember:

  • Measure the length, width, and height of your camper. Be sure to include any overhangs or other features.
  • Add 6 inches to each measurement to allow for overlap.
  • Round up to the nearest inch.
  • Order your cover based on the measurements you took.

With a properly fitted camper cover, you can rest assured that your camper will be protected from the elements, no matter what the weather brings.

Author Profile

Dale Richard
Dale Richard
Dale, in his mid-thirties, embodies the spirit of adventure and the love for the great outdoors. With a background in environmental science and a heart that beats for exploring the unexplored, Dale has hiked through the lush trails of the Appalachian Mountains, camped under the starlit skies of the Mojave Desert, and kayaked through the serene waters of the Great Lakes.

His adventures are not just about conquering new terrains but also about embracing the ethos of sustainable and responsible travel. Dale’s experiences, from navigating through dense forests to scaling remote peaks, bring a rich tapestry of stories, insights, and practical tips to our blog.