How to Measure for a Travel Trailer Cover: A Step-by-Step Guide

AvatarByDale Richard Traveling Information

How to Measure for a Travel Trailer Cover

A travel trailer cover is an essential investment for protecting your investment from the elements. It can help to keep your trailer clean, dry, and free from damage. But before you can buy a cover, you need to know how to measure your trailer.

In this article, we will walk you through the process of measuring your trailer so that you can get the perfect cover. We’ll also provide some tips on choosing the right cover for your needs.

So whether you’re a first-time buyer or you’re just looking to replace your old cover, read on for all the information you need to know.

Measurement Instructions Example
Length Measure from the front of the trailer to the back, including the hitch. 20 feet
Width Measure from the left side of the trailer to the right side, including the fenders. 8 feet
Height Measure from the ground to the top of the trailer, including the roof rack. 10 feet

Tools and materials you will need

To measure your travel trailer for a cover, you will need the following tools and materials:

  • A tape measure
  • A pencil
  • A marker
  • A level
  • A ladder, if needed

How to measure your travel trailer

To measure your travel trailer, you will need to measure the following:

  • The length of the trailer
  • The width of the trailer
  • The height of the trailer
  • The distance from the ground to the top of the trailer

To measure the length of the trailer, start at the front of the trailer and measure to the back of the trailer. Be sure to measure along the outside of the trailer, including the fenders.

To measure the width of the trailer, measure from the side of the trailer to the opposite side of the trailer. Be sure to measure along the outside of the trailer, including the fenders.

To measure the height of the trailer, measure from the ground to the top of the trailer. Be sure to measure at the highest point of the trailer, such as the roof or the air conditioner.

To measure the distance from the ground to the top of the trailer, you will need to use a ladder. Stand on the ladder and measure from the ground to the top of the trailer. Be sure to measure at the highest point of the trailer, such as the roof or the air conditioner.

Once you have measured all of the necessary dimensions, you can use them to order a travel trailer cover that will fit your trailer perfectly.

Measuring your travel trailer for a cover is a simple process that can be completed in just a few minutes. By following the steps in this guide, you can ensure that you order a cover that will fit your trailer perfectly and protect it from the elements.

How to Measure for a Travel Trailer Cover

Measuring for a travel trailer cover can be tricky, but it’s important to get it right so that your cover fits properly and protects your trailer from the elements. Here are the steps on how to measure for a travel trailer cover:

1. Measure the length of your trailer. This is the most important measurement, as it will determine the size of the cover you need. To measure the length, start at the front of your trailer and measure to the back. Be sure to include the hitch in your measurement.
2. Measure the width of your trailer. To measure the width, measure from one side of your trailer to the other, just above the wheels. Be sure to include the fenders in your measurement.
3. Measure the height of your trailer. To measure the height, measure from the ground to the top of your trailer. Be sure to include the roof rack in your measurement, if you have one.
4. Add 12 inches to each measurement. This will give you the finished size of your cover.

Once you have your measurements, you can order a travel trailer cover that is the right size for your rig. Be sure to read the manufacturer’s instructions carefully before installing your cover.

How to Choose the Right Size Cover

When choosing a travel trailer cover, it’s important to get the right size so that it fits your rig properly and protects it from the elements. Here are a few things to keep in mind when choosing a cover:

  • The size of your trailer. The most important factor in choosing a cover is the size of your trailer. Make sure to measure your trailer carefully and order a cover that is the right size.
  • The material of the cover. There are a variety of materials available for travel trailer covers, each with its own advantages and disadvantages. Some of the most common materials include vinyl, canvas, and polyethylene.
  • The weight of the cover. The weight of the cover is another important factor to consider. Heavier covers are more durable, but they can also be more difficult to install and remove.
  • The price of the cover. The price of a travel trailer cover can vary significantly, depending on the size, material, and features of the cover. Be sure to set a budget before you start shopping for a cover.

Once you have considered all of these factors, you can start shopping for a travel trailer cover that is the right size, material, weight, and price for your rig.

How to Install Your Cover

Installing a travel trailer cover is a relatively simple task, but it’s important to do it correctly so that the cover fits properly and protects your trailer from the elements. Here are the steps on how to install a travel trailer cover:

1. Prepare your trailer. Before you start installing the cover, you’ll need to clean your trailer thoroughly. This will remove any dirt, dust, or debris that could interfere with the installation process.
2. Lay out the cover. Once your trailer is clean, you can lay out the cover. Be sure to place the cover in the correct orientation, with the front of the cover facing the front of your trailer.
3. Attach the cover. There are a variety of ways to attach a travel trailer cover, depending on the type of cover you have. Some covers have built-in snaps or buckles, while others require you to use straps or bungee cords.
4. Tighten the cover. Once the cover is attached, you’ll need to tighten it so that it fits snugly against your trailer. Be sure to check all of the attachment points to make sure that the cover is secure.

Once you have installed your cover, you can enjoy peace of mind knowing that your trailer is protected from the elements.

Measuring for, choosing, and installing a travel trailer cover can be a daunting task, but it’s important to do it right so that your cover fits properly and protects your rig from the elements. By following these tips, you can get the job done quickly and easily.

How do I measure for a travel trailer cover?

To measure for a travel trailer cover, you will need to know the following dimensions:

  • Length: The length of your travel trailer from the front of the A-frame to the back of the trailer.
  • Width: The width of your travel trailer at its widest point.
  • Height: The height of your travel trailer from the ground to the top of the A-frame.

Once you have these dimensions, you can use them to find a travel trailer cover that is the right size for your trailer.

What if my travel trailer has an odd shape?

If your travel trailer has an odd shape, you may need to purchase a custom-made travel trailer cover. Custom-made covers can be expensive, but they will fit your trailer perfectly and provide the best protection.

How do I install a travel trailer cover?

To install a travel trailer cover, you will need the following materials:

  • Travel trailer cover
  • Screwdriver
  • Duct tape

1. Lay the travel trailer cover out on the ground.
2. Align the cover with the front of the trailer.
3. Secure the cover to the front of the trailer with screws.
4. Tuck the sides of the cover under the trailer.
5. Secure the sides of the cover to the trailer with duct tape.
6. Tuck the back of the cover under the trailer.
7. Secure the back of the cover to the trailer with duct tape.

How do I care for a travel trailer cover?

To care for a travel trailer cover, you will need to:

  • Store the cover in a dry place when not in use.
  • Wipe the cover down with a damp cloth to remove dirt and debris.
  • Do not use harsh chemicals on the cover.
  • Repair any tears or holes in the cover as soon as possible.

By following these tips, you can keep your travel trailer cover in good condition for many years to come.

In this blog post, we have discussed how to measure for a travel trailer cover. We have covered the different types of covers available, as well as the steps involved in taking the necessary measurements. We hope that this information has been helpful, and that you are now able to choose and purchase the perfect cover for your travel trailer.

Here are a few key takeaways:

  • The type of cover you need will depend on the size and shape of your trailer, as well as the climate in which you will be using it.
  • When taking measurements, be sure to account for the height of the A-frame, the overhangs, and any other features that may affect the fit of the cover.
  • It is important to install the cover correctly in order to ensure that it provides adequate protection for your trailer.

By following these tips, you can be sure to choose the right cover for your travel trailer and keep it protected from the elements for years to come.

Author Profile

Dale Richard
Dale Richard
Dale, in his mid-thirties, embodies the spirit of adventure and the love for the great outdoors. With a background in environmental science and a heart that beats for exploring the unexplored, Dale has hiked through the lush trails of the Appalachian Mountains, camped under the starlit skies of the Mojave Desert, and kayaked through the serene waters of the Great Lakes.

His adventures are not just about conquering new terrains but also about embracing the ethos of sustainable and responsible travel. Dale’s experiences, from navigating through dense forests to scaling remote peaks, bring a rich tapestry of stories, insights, and practical tips to our blog.