How to Measure the Length of Your Travel Trailer for Buying or Selling

AvatarByDale Richard Traveling Information

How to Measure the Length of a Travel Trailer

If you’re in the market for a travel trailer, one of the most important things to consider is its length. The length of your trailer will determine how much space you have to store your belongings, how many people you can comfortably accommodate, and how easy it will be to tow.

Measuring the length of a travel trailer is relatively straightforward, but there are a few things you need to know before you get started. In this article, we’ll walk you through the process of measuring the length of a travel trailer, so you can make an informed decision about which one is right for you.

Step 1: Find the Center of Gravity

The first step to measuring the length of a travel trailer is to find the center of gravity. The center of gravity is the point at which the trailer would balance if it were perfectly level. You can find the center of gravity by measuring from the front of the trailer to the back of the trailer, and then dividing that measurement in half.

Step 2: Measure from the Center of Gravity to the Front of the Trailer

Once you’ve found the center of gravity, you can measure the length of the trailer from the center of gravity to the front of the trailer. This measurement will give you the overall length of the trailer, including the hitch.

Step 3: Measure from the Center of Gravity to the Back of the Trailer

To get the overall length of the trailer, you’ll also need to measure from the center of gravity to the back of the trailer. This measurement will give you the length of the trailer without the hitch.

Step 4: Add the Two Measurements Together

To get the total length of your travel trailer, simply add the two measurements together. This will give you the overall length of the trailer, including the hitch.

Tips for Measuring the Length of a Travel Trailer

Here are a few tips for measuring the length of a travel trailer:

  • Make sure the trailer is level before you start measuring.
  • Use a tape measure that is long enough to reach from the front of the trailer to the back of the trailer.
  • Be careful not to measure over any obstructions, such as the hitch or the propane tank.
  • If you’re not sure how to measure the length of a travel trailer, ask a salesperson for help.

Measuring the length of a travel trailer is an important step in the buying process. By following these tips, you can get an accurate measurement of the trailer and make an informed decision about which one is right for you.

How To Measure Length Of Travel Trailer?

| Step | Description | Example |
|—|—|—|
| 1. Find the front and rear axles. | The front axle is located at the front of the trailer, and the rear axle is located at the back. | ![Front and rear axles of a travel trailer](https://i.imgur.com/042313Y.jpg) |
| 2. Measure the distance between the axles. | Use a tape measure to measure the distance between the front and rear axles. | ![Measuring the distance between the axles of a travel trailer](https://i.imgur.com/6051224.jpg) |
| 3. Add 10 inches to the measurement. | This will account for the overhang of the trailer. | ![Adding 10 inches to the measurement of a travel trailer](https://i.imgur.com/3900009.jpg) |

The total length of your travel trailer is the measurement between the axles plus 10 inches.

Tools Needed

To measure the length of your travel trailer, you will need the following tools:

  • A tape measure
  • A level
  • A pencil
  • A piece of paper

Measuring the A-Frame

The A-frame is the front of your travel trailer. It is the part that supports the roof and the front of the trailer. To measure the length of the A-frame, follow these steps:

1. Place the tape measure at the front of the A-frame, on the ground.
2. Extend the tape measure to the back of the A-frame.
3. Read the measurement on the tape measure.

The length of the A-frame is the distance from the front of the A-frame to the back of the A-frame.

Measuring the Body of the Trailer

The body of the trailer is the part that houses the living space. To measure the length of the body of the trailer, follow these steps:

1. Place the tape measure at the front of the body of the trailer, on the ground.
2. Extend the tape measure to the back of the body of the trailer.
3. Read the measurement on the tape measure.

The length of the body of the trailer is the distance from the front of the body of the trailer to the back of the body of the trailer.

Measuring the Tongue

The tongue is the part of the trailer that connects to the tow vehicle. To measure the length of the tongue, follow these steps:

1. Place the tape measure at the front of the tongue, on the ground.
2. Extend the tape measure to the back of the tongue.
3. Read the measurement on the tape measure.

The length of the tongue is the distance from the front of the tongue to the back of the tongue.

By following these steps, you can easily measure the length of your travel trailer. This information can be helpful when you are shopping for a new travel trailer or when you are trying to determine how much space you have in your current travel trailer.

Measuring the Body

The body of a travel trailer is the main section that houses the living quarters. It is typically made of fiberglass or aluminum, and it is supported by a chassis. The length of the body is the most important measurement to consider when choosing a travel trailer, as it will determine how much space you have inside.

To measure the body of a travel trailer, you will need a tape measure. First, find the front of the trailer and measure from the front of the bumper to the back of the trailer. This will give you the overall length of the body.

Next, measure the width of the body at its widest point. This will give you the maximum width of the trailer. Finally, measure the height of the body at its highest point. This will give you the maximum height of the trailer.

Once you have measured the body of the trailer, you can compare your measurements to the specifications of different models to find a trailer that will fit your needs.

Measuring the Tongue

The tongue of a travel trailer is the part that connects the trailer to the tow vehicle. It is typically made of steel or aluminum, and it is supported by a hitch. The length of the tongue is important because it determines how far the trailer will extend behind the tow vehicle.

To measure the tongue of a travel trailer, you will need a tape measure. First, find the front of the tongue and measure from the front of the tongue to the back of the trailer. This will give you the overall length of the tongue.

Next, measure the width of the tongue at its widest point. This will give you the maximum width of the tongue. Finally, measure the height of the tongue at its highest point. This will give you the maximum height of the tongue.

Once you have measured the tongue of the trailer, you can compare your measurements to the specifications of different models to find a trailer that will fit your needs.

Measuring the length, width, and height of a travel trailer is important in order to choose a trailer that will fit your needs. By following the steps in this guide, you can easily measure your trailer and find a model that is the perfect size for you.

How do I measure the length of my travel trailer?

To measure the length of your travel trailer, you will need a tape measure and a level surface.

1. Park your travel trailer on a level surface.
2. Open the door to the front of the trailer and extend the tape measure from the front of the trailer to the back of the trailer.
3. Make sure that the tape measure is level and that the ends are touching the ground.
4. Read the measurement on the tape measure.

What is the difference between the length of a travel trailer and the travel trailer’s wheelbase?

The length of a travel trailer is the overall length of the trailer, from the front of the trailer to the back of the trailer. The wheelbase of a travel trailer is the distance between the front axle and the rear axle.

**How do I measure the wheelbase of my travel trailer?

To measure the wheelbase of your travel trailer, you will need a tape measure and a level surface.

1. Park your travel trailer on a level surface.
2. Locate the front axle and the rear axle of the trailer.
3. Extend the tape measure from the center of the front axle to the center of the rear axle.
4. Make sure that the tape measure is level and that the ends are touching the ground.
5. Read the measurement on the tape measure.

**What is the standard length of a travel trailer?

There is no standard length for travel trailers. Travel trailers can range in length from 10 feet to 40 feet. The length of a travel trailer will depend on the number of people that will be using the trailer, the amount of storage space that is needed, and the type of activities that will be done in the trailer.

**What is the longest travel trailer?

The longest travel trailer on record is 45 feet long. This trailer was built by a company called American Dream RV and it was designed to accommodate a family of six. The trailer has five bedrooms, three bathrooms, and a full kitchen.

**How do I choose the right length of travel trailer for me?

When choosing the right length of travel trailer for you, there are a few factors to consider.

  • The number of people that will be using the trailer
  • The amount of storage space that is needed
  • The type of activities that will be done in the trailer

If you are planning on using the trailer for extended trips, you will need a larger trailer that has more storage space. If you are only planning on using the trailer for short trips, you can get away with a smaller trailer.

It is also important to consider the type of activities that will be done in the trailer. If you plan on doing a lot of cooking, you will need a trailer with a large kitchen. If you plan on doing a lot of outdoor activities, you will need a trailer with a large deck or patio.

Once you have considered all of these factors, you can choose the right length of travel trailer for you.

In this blog post, we have discussed how to measure the length of a travel trailer. We have covered the different methods of measuring, as well as the importance of getting accurate measurements. We hope that this information has been helpful, and that you will now be able to measure your travel trailer with confidence.

Here are a few key takeaways from this blog post:

  • The most accurate way to measure the length of a travel trailer is to use a tape measure.
  • You can also measure the length of a travel trailer by using a laser measure or a measuring wheel.
  • It is important to measure the length of your travel trailer from the front bumper to the back bumper.
  • You should also measure the length of your travel trailer from the ground to the top of the A-frame.
  • By following these tips, you can ensure that you get accurate measurements of your travel trailer.

Author Profile

Dale Richard
Dale Richard
Dale, in his mid-thirties, embodies the spirit of adventure and the love for the great outdoors. With a background in environmental science and a heart that beats for exploring the unexplored, Dale has hiked through the lush trails of the Appalachian Mountains, camped under the starlit skies of the Mojave Desert, and kayaked through the serene waters of the Great Lakes.

His adventures are not just about conquering new terrains but also about embracing the ethos of sustainable and responsible travel. Dale’s experiences, from navigating through dense forests to scaling remote peaks, bring a rich tapestry of stories, insights, and practical tips to our blog.