How to Easily Replace an Awning Arm on Your Travel Trailer

AvatarByDale Richard Traveling Information

How to Replace an Awning Arm on a Travel Trailer

An awning arm is a vital part of your travel trailer, providing shade and shelter from the elements. But what happens when an awning arm breaks? If you’re not sure how to replace it, you could be in for a long and frustrating experience.

In this article, we’ll walk you through the process of replacing an awning arm on a travel trailer. We’ll provide step-by-step instructions, along with photos and illustrations to help you along the way.

By the end of this article, you’ll have the confidence to replace an awning arm on your own, saving yourself time and money.

So if your awning arm is broken, don’t despair! Just follow our instructions and you’ll be back in the shade in no time.

How To Replace Awning Arm On Travel Trailer?

| Step | Task | Tools |
|—|—|—|
| 1 | Remove the old awning arm. | Wrench |
| 2 | Align the new awning arm with the holes in the trailer. | Tape measure |
| 3 | Drill new holes in the trailer if necessary. | Drill |
| 4 | Insert the bolts through the holes and tighten them with the wrench. | Wrench |
| 5 | Reattach the awning to the awning arm. | Screwdriver |

How to Replace Awning Arm on Travel Trailer?

Tools and Materials Needed

  • Replacement awning arm
  • Tape measure
  • Level
  • Wrench
  • Drill
  • Screwdriver
  • Penetrating oil
  • Safety glasses

Steps to Remove the Old Awning Arm

1. Locate the awning arm. The awning arm is typically located on the side of the travel trailer, near the roof. It is a metal bar that supports the awning.
2. Disconnect the awning from the arm. There will be a release lever or button on the awning that you will need to press to release the awning from the arm.
3. Remove the bolts that hold the arm in place. There will be two or more bolts that hold the arm in place. Use a wrench to loosen and remove these bolts.
4. Carefully remove the arm. The arm may be heavy, so be careful when removing it.
5. Inspect the arm for damage. Look for any cracks, bends, or other damage to the arm. If the arm is damaged, it will need to be replaced.

Steps to Install the New Awning Arm

1. Position the new arm. The new arm should be positioned in the same location as the old arm. Make sure that the arm is level.
2. Install the bolts that hold the arm in place. Use a wrench to tighten the bolts that hold the arm in place.
3. Reconnect the awning to the arm. Press the release lever or button on the awning to reconnect it to the arm.
4. Test the awning. Open and close the awning to make sure that it is working properly.

Tips for Replacing an Awning Arm

  • Make sure that you have the right tools and materials before you start.
  • Work slowly and carefully to avoid damaging the awning or the travel trailer.
  • If you are not comfortable replacing the awning arm yourself, you can hire a professional to do it for you.

Replacing an awning arm on a travel trailer is a relatively simple task, but it is important to follow the steps carefully to avoid damaging the awning or the travel trailer. By following these steps, you can easily replace your awning arm and get back to enjoying your travel trailer.

3.Disconnect the awning from the power source

Before you can remove the awning arm, you will need to disconnect it from the power source. This is usually a simple process that involves unplugging the power cord from the awning motor. However, it is important to read your awning’s owner’s manual to make sure you disconnect it correctly.

Once the awning is disconnected from the power source, you can proceed to remove the screws that attach the awning arm to the trailer.

4.Remove the screws that attach the awning arm to the trailer

The awning arm is typically attached to the trailer with a series of screws. These screws are usually located on the inside of the awning arm, so you will need to reach inside the awning to access them.

Once you have located the screws, use a screwdriver to remove them. Be careful not to damage the awning arm or the trailer.

Once the screws are removed, the awning arm should be free to move. You can now lift it off the trailer and set it aside.

Replacing an awning arm on a travel trailer is a relatively simple process. By following these steps, you can easily remove the old awning arm and install a new one.

Here are a few additional tips for replacing an awning arm:

  • Make sure the new awning arm is the same size and type as the old one.
  • Use new screws to attach the awning arm to the trailer.
  • Tighten the screws securely, but do not overtighten them.
  • Test the awning to make sure it is working properly before you use it.

    How to Replace Awning Arm on Travel Trailer?

Q: What tools do I need to replace an awning arm on my travel trailer?

A: You will need the following tools:

  • A socket wrench set
  • A screwdriver
  • A pry bar
  • A hammer
  • A piece of wood
  • Safety glasses

Q: How do I remove the old awning arm?

A: 1. Locate the awning arm. The awning arm is a metal rod that connects the awning to the travel trailer. It is typically located on the side of the trailer, near the roof.
2. Remove the screws that hold the awning arm in place. These screws are typically located at the top and bottom of the awning arm. Use a socket wrench to loosen the screws.
3. Pry the awning arm off of the travel trailer. Use a pry bar to gently pry the awning arm off of the travel trailer. Be careful not to damage the paint or siding.
4. Remove the old awning arm bracket. The awning arm bracket is a metal bracket that holds the awning arm in place. It is typically located at the top and bottom of the awning arm. Use a screwdriver to remove the screws that hold the bracket in place.

Q: How do I install the new awning arm?

A: 1. Install the new awning arm bracket. Place the new awning arm bracket on the travel trailer, in the same location as the old bracket. Use a screwdriver to attach the bracket to the travel trailer.
2. Install the new awning arm. Slide the new awning arm onto the awning arm bracket. Make sure that the arm is properly aligned.
3. Secure the awning arm in place. Use a socket wrench to tighten the screws that hold the awning arm in place.

Q: What is the best way to prevent awning arms from breaking?

A: There are a few things you can do to prevent awning arms from breaking:

  • Inspect the awning arm regularly for signs of wear and tear. Look for cracks, rust, or other damage. If you see any damage, have the awning arm repaired or replaced.
  • Do not overload the awning. The awning is designed to support a certain amount of weight. Do not overload the awning, as this could cause the arm to break.
  • Properly store the awning when not in use. When you are not using the awning, store it in a safe place. Do not leave the awning exposed to the elements, as this could cause the arm to rust or break.

Q: What should I do if my awning arm breaks?

A: If your awning arm breaks, you should have it repaired or replaced as soon as possible. A broken awning arm can be dangerous, as it could fall and injure someone. You should also have the awning arm repaired or replaced if it is damaged in any way.

Replacing an awning arm on a travel trailer is a relatively straightforward task, but it is important to follow the steps carefully to avoid damaging the awning or yourself. By following the steps in this guide, you can easily replace an awning arm on your travel trailer and enjoy your next camping trip in comfort.

Here are the key takeaways from this guide:

  • Before you begin, make sure you have the necessary tools and materials.
  • Disconnect the awning from the power source and lower it completely.
  • Remove the old awning arm by unscrewing the bolts that hold it in place.
  • Install the new awning arm by reversing the steps for removing the old arm.
  • Reattach the awning to the power source and raise it to test it.

By following these steps, you can easily replace an awning arm on your travel trailer and enjoy your next camping trip in comfort.

Author Profile

Dale Richard
Dale Richard
Dale, in his mid-thirties, embodies the spirit of adventure and the love for the great outdoors. With a background in environmental science and a heart that beats for exploring the unexplored, Dale has hiked through the lush trails of the Appalachian Mountains, camped under the starlit skies of the Mojave Desert, and kayaked through the serene waters of the Great Lakes.

His adventures are not just about conquering new terrains but also about embracing the ethos of sustainable and responsible travel. Dale’s experiences, from navigating through dense forests to scaling remote peaks, bring a rich tapestry of stories, insights, and practical tips to our blog.